Solar Obstruction Lights For Transmission Towers

Solar Obstruction Lights For Transmission Towers

Solar Obstruction Lights For Transmission Towers

Solar Obstruction Lights For Transmission Towers

By:Avlite Systems | June 21, 2016
Application: Permanent ICAO LIOL Type A fixtures for 132 kV electricity transmission towers
Location: Middle East
Site: Undisclosed

Background:

The customer required an ICAO compliant night time warning light system for transmission towers across the Middle East. The system needed to be low-cost, quick and easy to install and completely self-contained with an integrated power supply and fully automated to enable the lights to activate at dusk and deactivate at dawn.

A low-maintenance lighting system was also needed that wouldn’t require constant repairs or component replacement and that would run reliably for many years with minimal operator

intervention. If maintenance was required, however, the light fixtures or their components needed to be easily replaced without interrupting or effecting the tower’s operation or the performance of the lights on other towers close by.

 

The solution:

Avlite’s authorised distributor for the Middle East, recommended Avlite’s ICAO compliant solar- powered obstruction lighting solution to the customer as it met with their requirements.

To comply with ICAO standards, Avlite’s AV-C310 is independently tested to meet the photometric requirements set out by ICAO for lighting towers up to 45 meters.

The customer selected Avlite’s AV-C310 ICAO LIOL Type A fixture after a successful 2-year product trial, many in-country visits – including product familiarisation and training hosted by Avlite’s manufacturing facility in Australia.

The AV-C310 is fit-for-purpose, straight from the box and factory set to its steady-on, dusk-till-dawn operation mode allowing for efficient installation. The local installation crew needed only to activate the lights (prior to installation) by connecting the 4Pin battery connector inside the unit and securing the light head with just four bolts. The completely self-contained fixture – weighing only 9.1kg – was then hoisted up and fixed to the apex of each tower and quickly and easily bolted into position by two crewmen. Once bolted on, the lights were fully operational.

The project ran without complication with an impressive 18 lights installed per day.

 

Avlite’s solar powered ICAO LIOLA fixture;

  • is lightweight, self-contained and quick and easy to install
  • has a dusk-til-dawn mode for complete automatic operation
  • is cost effective both in terms of initial outlay and total cost of ownership
  • is energy efficient, reliable and low maintenance
  • has zero operating costs
  • can be easily retrofitted to new and existing structures
  • does not interfere with tower performance
  • withstands the harshest of environments
case study benifit

Benefits

  • ICAO compliant LIOL Type A
  • Lightweight, completely self-contained fixture easily installed by a small crew
  • Automatic dusk-till-dawn operation
  • Fit-for-purpose, straight from the box
  • Robust and long-lasting
  • Over 100,000 hours of LED life – never need to change a globe
  • User-replaceable battery
  • Available in a larger model AV-C410 for use in areas with lower sunlight
  • GPS & GSM versions available

Avlite Difference

All Avlite System Products are manufactured to exacting standards under strict quality control procedures. Avlite's commitment to reasearch and development, investing in modern equipment and advanced manufacturing procedures has made us an industry leader in solar aviation lighting. By choosing Avlite Systems you can rest assured you have chosen the very best.

Experienced & Trained Personnel

Avlite have world class application specialists in Aviation lighting products and solutions designed specifically for defense, government, civil and humanitarian aid operations. This team includes leading sales support, quality control plus in-house engineers who design and develop products to FAA, ICAO and military standards.

Worldwide Distribution team

Avlite are represented worldwide by three regional offices and a network of valued distributors to offer support when needed.

Agile Manufacturing

Avlite manufacturing capabilities include in-house Surface Mount Technology electronics and robotic assembly lines, rotational and injection moulding. The advantages include strict quality control and an ability to customise products. This customisation includes graphics, operational controls and monitoring options delivered via a purpose-built manufacturing plant.

Product Innovation

Avlite’s world leading research and development team is continuously developing innovative new solutions to their customer’s real-world challenges. This innovation is a result of customer requirements to maximise efficiency and safety whilst minimising cost.

Precision construction

Avlite manufactures solutions to exacting standards and strict guidelines to ensure they perform reliably in the most remote and toughest environments. All from a manufacturer that is ISO9001:2008 certified.

Rapid Turnaround

Avlite’s in-house manufacturing capabilities offer an advantage to customers requiring solutions quickly. By completely owning the production cycle Avlite are able to meet fast delivery requirements.